How to install the lifting clothes rack? What’s a good brand of clothes rack

the two top seats on this side are movable ends. The other two top seats are fixed seats. The difference between them is that the movable seat has two wheels, and the movable seat must be installed in the front.


how to install the lifting clothes rack? What’s a good brand of clothes rack

how to install clothes rack

clothes rack is our daily necessities, how to install it?

1. Fix with expansion screw.

II. Installation of the top seat:

on the top of the balcony to be installed, measure the diameter of the lamp on the top of the balcony with a steel ruler, and then make an installation mark between 15cm-30cm on both sides of the lamp (the length is determined according to the size of the balcony). Then measure the distance between the mark and the edge of the balcony, and determine the width of the top seat installation according to the distance. Then measure the length of the balcony with the lamp as the center, and determine that both sides of the lamp are equally divided into 80cm and 100cm according to the length of the clothes drying pole. There are four intersection points with the measured distance of the width, and these four intersection points are the installation position of the top seat of the clothes hanger. After the position is determined, drill the hole with an electric drill. After drilling, fix the four top seats with expansion screws (if the length of the rod exceeds the conventional size, adjust the distance accordingly).

note: the two top seats on the swing corner are movable ends. The other two top seats are fixed seats. The difference between them is that the movable seat has two wheels, and the movable seat must be installed in the front.

3. Installation angle:

the angle can be installed on the top of the balcony or the top of the wall. The angle is 50-70cm away from the movable top seat. It must form a triangle (45 degree angle) in the middle of the movable top seat and keep the same vertical line with the installation position of the rocker. Please refer to the drawing.

4. Steel wire connection:

there are two steel wires in a set of clothes hanger. First, take out one steel wire, first pass one end of the steel wire through the bearing steel wire groove at the corner, then pass through the bearing steel wire groove of the movable wheel of the movable end top seat (located at the upper part of the top seat), and then pass through the bearing steel wire groove of the fixed end top seat to make the steel wire perpendicular to the ground, Then insert the top cover from the steel wire and clamp the top base cover. The other end of the steel wire also passes through another hole of the bearing steel wire groove at the corner, and then passes through another steel wire groove of the movable wheel bearing of the movable seat (under the same top seat), so that the steel wire is perpendicular to the ground, then insert the top cover from the steel wire, and clamp the top seat cover. The installation method of the other steel wire is the same.

5. Air drying connection:

at the head end of each steel wire, wear a hanging ball and knot in the hanging ball; Then pull the ball to the top seat. At this time, pull the steel wire from the corner to form a double stranded steel wire, which is stuck at one end of the hand shaker; Loosen the steel wire in the hand shaker, drop the hanging ball, put the drying rod through the hanging ball, then screw the hole of the hanging ball tightly and fix it, and screw the screw well; Finally, install the plug on both ends of the drying rod.

how to install the lifting clothes hanger

clothes drying quilt is a matter that every family will encounter. The clothes drying appliances on the balcony have also been changing, from the original bamboo pole (now mostly used in rural areas) to the later fixed stainless steel pole (take a fork to dry clothes), and then to today’s hand-operated lifting clothes hanger, Have to sigh, life is more and more convenient, drying clothes is also more and more relaxed and beautiful. So, how to install the lifting clothes rack? First of all, let’s take a look at the product composition of the hand-held lifting hanger: drying rod, hand shaker, top seat, steering wheel, hand shaker and the wire rope connecting all these.

2. The installation requirements are actually quite simple. One wall and one roof can be installed, and the angle between the wall and the roof is 90 degrees.

length of drying pole: generally, the longest is 2.8m, and the shortest can be cut according to the size of balcony.

installation requirements of hand shaker: solid wall is the best, because the weight will be concentrated in the position of hand shaker when it rises after drying clothes. If it is installed in the position of ceramic tile, it is required that the ceramic tile shall not have hollowing, otherwise it is easy to break the ceramic tile when drilling and later using.

wire rope Routing: the wire rope direction from the top seat to the steering wheel (parallel), and the wire rope direction from the steering wheel to the hand rocker (vertical).

3. Installation requirements of the top seat: the top seat of the clothes rack on the market is mostly composed of decorative top cover and fixed pulley. The original roof (reinforced concrete) installation is the best, but there are also cases of ceiling.

4. This kind of ceiling is also very convenient to install the lifting hanger. The top is flat, and the top and the wall form a 90 degree right angle. Suspended ceiling materials include gypsum board, plastic gusset board, aluminum gusset board, etc. (it should be noted that integrated suspended ceiling is not included in this list), and fixed ceiling materials include light steel keel, wood block, etc. Please pay attention to the shape of light steel keel:

5, groove downward and relatively thin, unable to fix the top seat of clothes rack. Therefore, generally speaking, if you want to install the lifting hanger, it is recommended to use wood block or add two wood blocks on the basis of light steel keel according to the figure below.

6. For this kind of ceiling, the hanger installation personnel shall be informed of the location of the wooden stop. In fact, the clothes rack is fixed on the wooden shelf. How to install

electric clothes rack? How to install

electric clothes rack? Xiaobian carefully summarized the installation process and precautions.

I. installation of top base: it is necessary to add load bearing at the installation base, which is generally treated with wood board. On the top of the balcony to be installed, measure the diameter of the lamp on the top of the balcony with a steel ruler, and then make an installation mark between 15cm-30cm on both sides of the lamp (the length is determined according to the size of the balcony). Then measure the distance between the mark and the edge of the balcony, and determine the width of the top seat installation according to the distance. Then, the length of balcony was measured with the lamp as the center. According to the length of the clothes drying pole, both sides of the lamp were divided equally by 80cm & mdash; 100cm, and then there are four intersections with the measured distance of width, which are the installation positions of the top seat of the electric clothes rack.

after the position is determined, drill the hole with an electric drill. After drilling, fix the four top seats with expansion screws (if the bar length exceeds the conventional size, the distance should be adjusted accordingly).

note: the two top seats on the angle of the rocker are the movable ends. The other two top seats are fixed seats. The difference between them is that the movable seat has two wheels, and the movable seat must be installed in the front.

2. If you want to install a multi pole electric clothes hanger, the width of the balcony should be more than 1 meter. If the area can be expanded within 1 meter is small, the air drying effect is poor.

3. If the air height is more than 3 meters (usually double-layer), you need to add wire rope. At the same time, customers need to provide their own high stairs.

4. Installation of corner: the corner can be installed on the top of balcony or wall. The distance between the corner and the movable top seat is 50-70cm. It must form a triangle (45 degree angle) in the middle of the movable top seat and keep the same vertical line with the installation position of the rocker. Please refer to the drawing.

v. steel wire connection: there are two steel wires in a set of electric clothes hanger. First, take out one steel wire, first pass one end of the steel wire through the bearing steel wire groove at the corner, then pass through the movable wheel bearing steel wire groove (located at the upper part of the top seat) at the movable end top seat, and then pass through the bearing steel wire groove at the fixed end top seat to make the steel wire perpendicular to the ground, and then sleeve the top cover from the steel wire, Clamp the top seat cover. The other end of the steel wire also passes through another hole of the bearing steel wire groove at the corner, and then passes through another steel wire groove of the movable wheel bearing of the movable seat (under the same top seat), so that the steel wire is perpendicular to the ground, then insert the top cover from the steel wire, and clamp the top seat cover. The installation method of the other steel wire is the same.

6. Dry and connect at the head end of each steel wire, wear a hanging ball, and knot in the hanging ball; Then pull the ball to the top seat. At this time, pull the steel wire from the corner to form a double stranded steel wire, which is stuck at one end of the hand shaker; Loosen the steel wire in the hand shaker, drop the hanging ball, put the drying rod through the hanging ball, then screw the hole of the hanging ball tightly and fix it, and screw the screw well; Finally, the plug is installed on both ends of the electric clothes drying rod.

7. Customers who live on high floors can choose the electric clothes rack. The clothes rack has strong balance ability, which can effectively prevent the adverse effects of windy weather.

what brand of clothes rack is good

what brand of clothes rack? Which brand of clothes rack is better? What brand of clothes hanger is of the best quality? We have searched the list of the most popular and best-known clothes hanger brands.

1, haomadame hotata (famous trademark in China, famous trademark in Guangdong Province, top ten clothes hanger brands, landmark brand in China’s clothes hanger industry, Guangdong haomadame Technology Development Co., Ltd.).

2, Aiyi Leye (a comprehensive enterprise integrating R & D / design / manufacturing / sales and service of clothes hangers, top ten brands of clothes hangers, Guangzhou Aiyi household products manufacturing Co., Ltd.).

3, handsoo (R & D / production / sales / service as one of the household products high-tech enterprises, clothes rack top 10 brands, clothes rack brand, Zhengzhou handsoo daily necessities Co., Ltd.).

4, Aiqing (started in 1983, China famous brand, member enterprise of China Federation of industry and commerce, top 10 clothes hanger brands, Foshan Nanhai Haijin Hardware Products Co., Ltd.).

5, Meiling clothes hanger (China famous trademark, one of the core enterprises of Meiling Group, top ten clothes hanger brands, mainly small household appliances, Hefei Meiling household appliances Co., Ltd.).

6, orant (private technology enterprise, international famous brand, top 10 clothes hanger brands, leader of intelligent balcony appliances, Shenzhen orant Intelligent Control System Co., Ltd.).

7, tulip (one of the most competitive brands in the industry, top 10 clothes hanger brands, large manufacturing base of China clothes hanger, Zhengzhou lianri household products Co., Ltd.).

8, Yiyin (Yiyin (Fujian) household products Co., Ltd., a leading enterprise of clothes hanger / other household products, top ten clothes hanger brands).

9, jinnuocadi (a large-scale modern enterprise integrating investment / product R & D, production / marketing, top 10 clothes hanger brands, Dongguan JINEN Home Hardware Co., Ltd.).

10, AIRBA (focusing on R & D / production and sales of clothes dryers, top 10 brands of clothes racks, professional supplier of China’s clothes dryers industry, Guangzhou AIRBA Intelligent Technology Co., Ltd.)

.

Leave a comment

Your email address will not be published.