Ironing methods and skills of clothes sweater pants shirt neckline ironing tips

ironing refers to ironing the material through a hot iron. Generally, an iron is used to iron clothes to make them smooth. Ancient name & quot; Iron & quot;, Also known as & quot; Fire bucket& quot; Jindou & quot;. It is usually made of metal. In ancient times, it was usually heated by charcoal fire and then ironed. Let’s learn about it.

1、 Preparation:

a steam iron, an ironing table, a piece of thin cotton cloth.

2. Basic ironing principles:

* ironing principles: (1) ironing the reverse side first, then the front side( 2) Iron the part first, then the whole.

* the ironing sequence of the top is: Split & gt; Welt & gt; Placket & gt; Pocket & gt; Back & gt; Predecessor & gt; Rotator cuff & gt; collar.

* the ironing sequence of trousers is: waist & gt; Seam & gt; Hem & gt; Pants body.

* the ironing sequence of shirts is: Split & gt; Sleeves & gt; Collar & gt; Back & gt; Pleats & gt; Placket & gt; Front shoulder.

3、 Methods and skills for ironing sweaters, trousers, shirts and necklines

1. Methods for ironing sweaters:

sweaters, knitted materials and other clothing, if ironed directly with an iron, the elasticity of the tissue will be destroyed, At this time, it is best to use steam iron to spray water on the wrinkles; If the wrinkle is not very severe, you can also hang it up and spray water directly at the wrinkle. When it is dry, it will be naturally smooth; Another way is to hang it in the bathroom and use the hot steam to make it smooth.

2, pants ironing method:

, the order is as follows: turn the pants over, open the pocket, ironing the crotch first, then the pocket, the corner and the cloth suture, then ironing the front, then the inside of the right foot, the outside of the right foot, the inside of the left foot, the outside of the left foot, and finally combine the two pants corners to decorate.

3, collar ironing skills:

neckline part, pay attention not to pull it out of shape when ironing, it is best to fix the shape and then ironing; If there is a collar piece, don’t burn it to death. Just fold and press it gently while it is still warm after ironing, so that the collar piece will look alive.

4, shirt ironing method:

* collar: flatten the front and back sides of the collar, ironing from the collar tip to the middle, repeat the action on the back of the collar, then fold the collar from the seam and iron it, shape it, press the collar into an arc with the fingers of both hands when it is hot, and iron the middle part of the folded collar firmly, so that the three-dimensional feeling of the collar is immediately displayed.

* cuffs: close the front of the shirt, lay the back flat on the ironing table, iron the back of the two sleeves respectively, and then iron the cuffs; Finally turn over and iron the front of the two sleeves.

* sleeve: lay the sleeve flat on the ironing table, align it with the seam in the middle of the sleeve, and iron it back and forth.

* front and back: hold the top of the shirt placket with the left hand, and iron it with the right hand from the bottom to the shoulder. Pay attention to smooth and iron.

4、 Ironing tips

1. The clothes to be ironed should not be too dry in the air. If the clothes are too dry, they should be put on a smooth board before ironing and evenly sprayed with water, or the clothes should be padded with twisted wet cloth.

2. If there are small mildew spots on the clothes, wash them with water containing vinegar before ironing them.

3. Prepare a piece of square pure cotton cloth as a pad, because if you press it directly on the surface of the clothes with an iron, it will be bright and white after a long time, so you need to cover it with a piece of cotton cloth before ironing.

4. When ironing, it should be ironed along the grain of the material. In case of oblique cutting, it should also be ironed along the grain.

5. Generally, ironing should be done on the reverse side first and then on the front side; Iron thick first, then thin; Iron nylon first, then cotton and hemp.

6, chiffon yarn and other thin materials, need to use a lower temperature ironing, ironing should not be too hard, so as not to break.

7. If the wrinkles of the clothes are too deep to be ironed easily, spray some diluted white vinegar on them and then iron them again. It is easy to be ironed without repeatedly ironing to damage the fabric.

8, ironing women’s clothing, you can first spray a few drops of perfume, ironing the clothes emitting fragrance.

9. If the iron is not smooth, use old cotton cloth to wrap some candle fragments and rub the bottom of the iron.

10. After ironing, clothes should not be packed or put into the wardrobe immediately. They should be hung up immediately to disperse the hot and humid air and keep upright; Reduce the possibility of mildew and odor.

5、 How to use iron correctly:

1, household iron usually use steam iron, if it is polyester or silk need low temperature, it is best to cover with cotton cloth to iron, so as not to damage the clothes.

2. When turning on the power supply for ironing, pay attention to observe the ironing effect and the change of the smell and color of the fabric (especially the natural fiber fabric). If there is a slight change, turn off the power supply immediately. If the temperature is not enough during the ironing process, turn on the power supply again.

3. If you use a non steam iron, if you want to protect your clothes, you can put a wet cloth on them for ironing. Because you want to make the water differentiate into steam, the temperature drops very quickly. At this time, you need to slow down the ironing speed, which can be light first and then heavy, so that the water can evaporate and spread evenly and the temperature can be distributed evenly.

Ironing skills

cashmere products: after drying, use medium temperature (about 140 ℃) electric steam iron to iron. The distance between the iron and cashmere sweater is 0.5-1cm. Never press on it.

synthetic fiber: due to the poor moisture absorption and heat resistance of chemical fiber clothing, the key is to master the ironing temperature, and the ironing method is basically the same as other cotton and wool fabrics. Nylon fabric is wear-resistant and elastic, but the ironing temperature should not be high, so a dry cloth should be used as a pad for ironing. Polyester fabric is wear-resistant and wrinkle free, so it can be dried after washing without ironing. Because there are many kinds of chemical fiber clothing, the temperature is difficult to grasp. Before the first ironing, try ironing the unobvious part of the clothing, in order to avoid the rabbit ironing.

cotton and linen fabrics: can increase the amount of steam. Generally use the method of ironing inside, if the front ironing should pad clean white cloth. The colored clothes should be ironed first, and the temperature should not be too high, so as to avoid the phenomenon of light reflection or pan color after ironing, making the clothes brittle. When hemp and cotton hemp blended fabrics need ironing, the temperature of the iron should be low, the clothes should be ironed first, and the cloth should be padded for ironing, so as to prevent the fuzzing from damaging the clothes.

silk fabric: due to poor wrinkle resistance after washing, silk clothing often shrinks, which will affect the appearance without ironing, so the washed silk clothing must be ironed. When ironing, the temperature should be appropriate and the method should be appropriate. If you want to iron at low temperature, the iron temperature is generally controlled between 110 ℃ and 120 ℃. If the temperature is too high, it is easy to make the clothes pan color, shrink, soften, deform, and even damage the clothes. The temperature of delicate and light colored clothing and blended silk clothing should be lower. When ironing, don’t use too much force. The iron should move continuously. Don’t stay in one place for too long. Don’t iron silk directly with iron. Iron with cloth or the reverse side of clothes to prevent aurora. Brand water stains affect the appearance and washing quality.

necktie: the fabric of necktie is mostly silk, and the lining is usually fine cloth or fine linen. To use low and medium temperature, ironing speed should be fast, ironing should be padded with a dry cloth, do not let the steam directly stick to the tie.

pleated skirt: first iron the skirt head, fix the position of all creases, and then iron the creases one by one. After ironing each crease, remove the crease and iron its bottom to further fix the crease.

Shirts: iron from top to bottom. Collar: ironing from the outside of both sides to the middle; Sleeve: from the bottom of the sleeve to the shoulder ironing; Body: iron the front first, then the back.

suit pants: turn the pants upside down and iron the inside pants pocket; Put the pants back to the front, iron them from the inside to the outside, and then iron the bottom of the pants. It is not suitable for direct ironing. A thin cloth should be padded before ironing.

Leave a comment

Your email address will not be published. Required fields are marked *