watch water treatment method 1: if the watch is soaked in water, use several layers of toilet paper or absorbent flannelette to tightly wrap the watch, put it about 15 cm near the 40 Watt electric lamp bulb, bake it for about 30 minutes, and the water vapor in the watch can be evaporated. Do not bake the watch cover close to the fire, so as not to deform the watch cover.
watch water treatment method 2: cover the watch inward, the bottom shell outward, reverse wear on the wrist, two hours after the water can be eliminated. If the water is serious, it’s better to send it to the meter shop to wipe oil immediately to remove the moisture of the movement, so as to avoid parts rusting.
watch water treatment method 3: use granular silica gel and the watch that has accumulated water together into a closed container, a few hours later, take out the watch, the water will disappear. This method is simple and economical, without any damage to the accuracy and life of the meter. The silica gel that has absorbed water for many times can be dried at 120 ℃ for several hours. The water absorption capacity is renewable and can be used repeatedly.