when we usually wash clothes, we all like to put more washing powder and soak for a while, thinking that we can clean them. In fact, this approach is wrong! Now let’s share the wrong way and reason of washing clothes, and see if you are successful!
The wrong way to wash clothes is
1. Soak for one night and then wash
. Some people are used to soak their clothes in the bucket for several hours, or even a whole night, They think the longer they soak, the cleaner the stain will be. In fact, when the clothes are soaked for too long, the stains on the clothes will be more prone to chemical decomposition, resulting in odor. Not only can sweat or stains not be lost, but they enter the fiber of the clothes, reducing the service life of the clothes. Generally speaking, if the clothes are dirty enough to soak, soaking for 15 minutes is enough.
. the more the washing powder is, the better.
, this may be the habit of many people. The more froth the washing powder, the more people will think it will be cleaner. In a washing machine with a set cleaning time, if too much washing powder is attached to the clothes, it will be difficult to clean them. Then put on clothes that are still attached with detergent chemicals, people with sensitive skin will easily cause allergic reactions. Therefore, it is mainly suggested that the capacity of the clothes to be washed should refer to the capacity recommended in the washing powder manual, so as to wash them clean and not get sick.
3. Dirty clothes accumulate to a certain extent, and then wash together
[laundry tips] teach you how to wash clothes
before washing
step 1:
classification
classification by color: first pick out the dark or bright clothes, Do not wash with light color (because dark color clothes may fade);
classified by thickness: silk fabric, light mesh fabric, underwear, socks, knitwear or easily deformed clothing, it is better not to use machine washing to avoid damage.
according to the classification of fiber raw materials: before wool or special cloth should be picked out for dry cleaning, otherwise it will cause shrinkage and deformation.
step 2: 6667
check the clothes
check whether there are articles in the pockets of the clothes (to avoid polluting the clothes or wearing the machine when washing); Clothes with special dirt should be cleaned first and then washed with the same kind of clothes; The parts, accessories and ornaments that need to fall off should be sewn firmly and then washed with the same kind of clothes to avoid falling off; Clothes with buttons or chains should be buckled or zipped when washing to avoid deformation. For example: cardigan and other clothing, buttoned up to grow simple, unbuttoned clothing transverse very wide, width to length ratio will change, often shorter length, width will be widened.
Washing method:
step 1:
soak before washing. Before washing, soak the clothes in liquid soap or washing powder solution for 10-14 minutes to let the detergent work with the dirt on the clothes, and then wash. In this way, the running time of the washing machine can be reduced by about half, and the power consumption can be reduced by half correspondingly.
step 2:
color separation washing, first light then deep. If you wash clothes of different colors separately, you can not only wash them clean, but also wash them quickly. Compared with washing them together, you can shorten the time by 1 / 3.
step 3:
thin before thick. Generally, thin and soft chemical fiber and silk fabrics can be washed in four or five minutes, while thicker cotton and wool fabrics can only be washed in ten minutes. Washing the thickness separately can shorten the running time of the washing machine more effectively than washing it together.
step 4:
rated capacity. If the washing amount is too small, the electric energy will be consumed in vain; On the contrary, too much washing at a time will not only increase the washing time, but also cause the motor to run overload, which not only increases the power consumption, but also easily causes the motor to be damaged.
step 5:
water consumption is moderate, not too much or too little. Too much water will increase the water pressure of the wave plate, increase the burden of the motor and increase the power consumption; If the amount of water is too small, it will affect the up and down movement of clothes when washing, increase the washing time and increase the power consumption.
step 6:
correctly grasp the washing time to avoid invalid action. The cleanliness of clothes is mainly related to the degree of dirt, the type and concentration of detergent, but not directly proportional to the washing time. Beyond the prescribed washing time, the cleanliness will not be greatly improved, and the electric energy will be wasted.