Teach you how to remove the traces of adhesive tape skillfully

teach you how to remove the traces of adhesive tape skillfully

transparent tape is often used in daily life, but it is very troublesome to remove the traces if you are not careful.

1, double-sided adhesive tape removal method

1, do not tear off the layer of paper, with the hair dryer blowing heat, and then a take can take down.

2. If you have left a black mark, you can apply some white flower oil on it, then wipe it with a rag, and then clean it with clean water. If you don’t have white flower oil at home, you can use essential oil or Dieda oil to rub it repeatedly.

3. If the black mark is not big, you can wipe it with an eraser. If the area is large, anhydrous alcohol, that is, industrial alcohol, can be applied to the paste position, and then wipe it with a cloth.

4. Use a piece of dry cloth covered with vinegar to cover the whole trace. When the double-sided adhesive tape is completely wet, gently scrape it off with a ruler.

2. The removal method of transparent glue marks

1. Using the eraser, the eraser is also very effective to remove the transparent glue marks, but it is only suitable for a small range of marks.

2. Use wet towel. This method may be the one we think of when we first find traces of transparent glue. We can use a wet towel to wet the offset printing place, and then slowly wipe, but this method is limited to the place that is not afraid of sticky wet.

3. Use alcohol to wipe. First, when using this method, it is necessary to determine in advance that the place to be wiped is not afraid of fading. After gluing alcohol on a cloth, slowly wipe it until it is wiped off.

4 and detergent also have the effect of removing the traces of transparent glue, and the use steps are the same as other methods.

5, ordinary nail washing water because there are chemical components, so the effect of removing traces of transparent glue is also very good.

three, the double-sided glue removal method on the wall

, first use the nail polish oil pigment to wipe the water to see. Because to light water can make the wall with the original color off. This method is recommended to be used in a small place that is not obvious. It is not recommended to use if the wall is large and conspicuous.

2. Use the heating method to soften the double-sided adhesive tape. Blow it with a hair dryer. When the double-sided adhesive tape becomes soft, the marks can be easily removed.

3. We can take a piece of dry cloth covered with vinegar to cover the whole double-sided tape trace. After the double-sided tape is completely wet, it can be easily removed with a ruler.

four, foam double sided glue removal method

, if attached to the wall, you can use a sharp object to scrape a small corner, and then press the small corner with your hands to tear down. This method is tiring, but it won’t leave any trace.

2, if you put it on plastic, dip the towel in the hot water, soak the foam double-sided glue, and then find the small corner slowly scrape off.

3. If it is pasted on the glass, try to use detergent. Take some detergent powder and put it on a semi wet cloth. Wipe it back and forth several times. If it is a hard mark, you can wet the mark first, and then use decontamination powder.

4. Soak the cloth in warm water first, and then wipe the trace position. While wiping, generally spray detergent. After a while, the offset will become soft and easy to remove.

Leave a comment

Your email address will not be published. Required fields are marked *