The ring is too tight to be worn on the hand. It’s a lazy trick that the ring can’t be taken off for a long time.

the ring worn on the finger can’t be taken off for various reasons. What should I do? Let’s share some tips for removing the ring.

What should I do if I can’t take the ring off?

there are many ways to remove the ring. At the beginning, most people would not want to damage the ring, so they had to squeeze it out. Usually we take out the ring by lubrication, including soap, glycerin, or other oily products to achieve the purpose of lubrication, but with the loss of time, if it can not be removed within a few minutes, it will enter the swelling stage. But generally, the stuck part of our ring is at the joint, so as long as we push the ring back to the proximal end, we can reduce the swelling and restore blood flow. But sometimes the removal time is too long, which will cause the return vein blocked, and at this time it will start to swell. Once the finger becomes more and more swollen, the blood supply of the artery will also be compressed. At this time, the ring can only be damaged, otherwise it is difficult to remove the ring.

if the ring is too hard to be broken or to be taken out in a way that does not damage the ring, the method is to drive the blood from the distal end of the finger back to the proximal end of the ring as far as possible. So it’s a way to raise your hand higher than your heart, and take it out after it’s swollen; In addition, there are some ways to bind the ring from the far end to the near end with plate thread or elastic rubber, and then slowly remove the ring after a period of time. But in fact, if we patiently and slowly use lubrication and rotation, under moderate local anesthesia, before the swelling makes the ring embedded in the skin, we can actually take a period of time to remove it, But the skin on the fingers will inevitably be damaged.

secondly, if the ring swells into the skin and cannot be moved, the above method will not work, so it can only be removed with tools. Traditionally, there are several tools used to remove rings. In addition to the ring clippers, other damage clippers can also be used to cut the rings. However, when using tools to damage rings, the most important thing is to encounter rings with too hard materials. Sometimes, it is very difficult to find damage tools. Therefore, in the process of damage, in addition to protecting the skin inside the ring, it is not a choice to make a gap in the ring first, and then damage it with more appropriate tools along the gap. If the ring can not be removed by these methods or the finger is necrotic due to ischemia for a long time, we can only enter the operation room to anesthetize the hand, and then debridement and remove the ring in the operation room.

when you choose to wear a ring, you must choose the appropriate ring, and the best hardness is not too hard to cause cutting difficulties. If you find that you are pregnant or gaining weight, you must pay attention to whether the ring you wear is stuck on your finger. Once you find that there is, it is best to remove it as soon as possible. Otherwise, you have to wait until the whole finger is swollen. It usually takes some effort to turn the sausage back into a hot dog, And the skin of the hand is inevitably damaged during the removal process. Generally in the fire brigade or provide emergency medical institutions can help people deal with these problems.

Some women have never taken off their rings since they got married and are expecting to give birth. I wanted to take off the ring and put it away during the due date, but I didn’t expect that my fingers were already long and thick, and the ring was stuck in the meat. I couldn’t take it off with many methods.

1. The method of heat expansion and cold contraction

ring has been worn for more than ten years. Unconsciously, the whole ring is stuck in the meat and can’t be taken off. But if you put your hand in the refrigerator to freeze for a while, or freeze a lot of ice, put it on both sides of the finger wearing the ring, pinch it firmly from left to right, and be sure to touch this side of the ring. Cover it for almost half an hour, and the finger feels smaller. Then apply some lubricating oil, and the ring will be taken off soon. This method is relatively simple.

2. Tools directly break

. Find a jewelry shop and ask the master in the shop to break the ring with tools, and then connect it again. This is probably the simplest and most recommended method.

The ring is worn on the index finger& mdash; If you only want to fall in love and don’t want to get married, put the ring on your index finger.

on thumb & mdash& mdash; The emperors before

didn’t have to do anything, they all wore rings on their thumbs. In fact, it’s a little inconvenient to wear them. In addition, Dai Yu’s rings have the effect of lowering blood pressure, because the blood vessels are all in the fingers. If people have high blood pressure, Yubing has a soothing effect.

on middle finger & mdash& mdash; Being able to establish a reputation is usually a sense of commitment and recognition. Therefore, most engagement rings are worn on the middle finger. Single nobles who want to get married can also wear them on the middle finger.

on ring finger & mdash& mdash; To prevent money leakage and villains.

because the wealth line is between the ring finger and the middle finger, you should wear this finger to prevent villains, because villains usually stab your anonymous in the dark.

Leave a comment

Your email address will not be published. Required fields are marked *